Servo Presser le likarolo tse kholo tsa mochini oa Oiling
Likarolo tsa mantlha tsa li-valve tsa servo tsa KST-660: setulo sa tokiso, seporo sa slide, koloi ea servo, kamore ea oli e ngata, piston ea palo e nepahetseng, 'mele o tlase oa valve, piston ea silinda le phala ea oli.
| Boemo | 0.05cc-20cc |
| Nepahalo | ± 1% -2% |
| Allowance | NLGI # 00- # 3 |
| Khatello e sebetsang | 6-120kg / cm2 |
| Tlhokahalo ea khatello ea moea | 0.4 ~ 0,6MPa |
| Boima ba 'mele | 3kg |
| Boholo | 45 * 90 * 380mm |
| Mocheso oa mocheso oa mosebetsi | -10 °C ~ +50 °C |
1. Sehlahisoa se nepahetse ka bongata.
2. The segokanyimmediamentsi sa sebolokigolo e beha ka ho toba palo ea oli ho lokolloa mohato oa pukwanana tokiso.
3. Litaelo li ka bolokoa ka kotloloho le wiring ea taolo ea sebopeho.
4. E ka beha oli ea ho tšoela mathe ho lekana.
5. Ka mamello. Felisa ho lutla, ho khaphatseha, brashi le liketsahalo tse ling.
6. E ka hlomelloa ka ho tlatsa, ho tšoela mathe, ho netefatsa tlhahlobo ea inductor, ho ba le phello ea ho khutlisa.
7. Ho ea ka boemo ba sebele, e ka kopanngoa le lihlopha tse ngata tsa libaka tse tsitsitseng tsa lesoba.
8. E ka sebelisoa ho NLGI # 00- # 3 grease, semi-solid, viscosity e phahameng, mokelikeli, joalo-joalo.
Likarolo tsa mantlha tsa valve ea boholo ba KST: lokisa setulo, sebaka sa polokelo ea bongata, piston ea palo e nepahetseng, 'mele o tlase oa valve, piston ea silinda le phala ea oli.
| mohlala | KST-701 | KST-150 | KST-550 | KST-033 |
| Nako | 0.007cc-0.1cc | 0.05cc-1cc | 0.5cc-5cc | 3cc-30cc |
| Nepahalo | ±1%-3% | ±1%-2% | ||
| Allowance | NLGI#00-#3 | |||
| Khatello e loketseng | 6-50kg/cm² | 6-100kg/cm² | ||
| Tlhokahalo ea khatello ea moea | 0.4 ~ 0.6MPA | |||
| boima | 0.5kg | 1.3kg | 1.6kg | 2.3kg |
| Litekanyo mm | 28*28*108 | 38*46*225 | 45*56*230 | 48*58*265 |
| tikoloho ya ho sebetsa | -10-+50℃ | |||
1. Sehlahisoa se lekantsoe, 'me ho na le mefuta e fapaneng ea mekhoa eo u ka khethang ho eona.
2. Ka mamello. Felisa ho lutla, ho khaphatseha, brashi le liketsahalo tse ling.
3. E ka hlomelloa ka ho tlatsa, tiiso ea oli ea spit ea pontšo e nang le phello e silafetseng.
4. Ho ea ka boemo ba sebele, e ka kopanngoa le lihlopha tse ngata tsa libaka tse tsitsitseng tsa lesoba.
5. E ka sebelisoa ho NLGI # 00- # 3 mafura, semi-solid, viscosity e phahameng, mokelikeli, joalo-joalo.
Molemo:
1. Ho rapalla, ente e tobileng ho fetola nozzle.
2. Cross spray hammoho le molamu o molelele ≤1000mm bolelele e ka ba ka boikhethelo.
Sebaka sa kopo:
NLGI # 00- # 3 botoro, semi-solid, viscosity e phahameng, metsi.
| mohlala | KST-810P |
| Nako | taolo ya nako |
| Nepahalo | ± 10% |
| Oli e loketseng | NLGI # 00- # 3 mafura |
| tikoloho ya ho sebetsa | -10 ° C - + 50 ° C |
| Khatello e loketseng | 6-120kg / cm2 |
| Tlhokahalo ea khatello ea moea | 0.4-0.6MPa |
| boima | 0.5kg |
| Boholo | 30mm * 30mm * 150mm |
Molemo:
1. Mefuta e fapaneng e ka fanoa.
2. Phetoho ea raster e ka finyella taolo e bonolo ea palo ea sekhomaretsi (oli).
3. E ka sebelisoa bakeng sa ho lokisa li-screw tsa hex le bakeng sa ho lokisanate e patiloeng.
4. Ho sibolloa ha nale ka phetoho ea grating ho ka khethoa.
| Khatello e phahameng | 100bar |
| Khatello e nyane | 6bar |
| Khafetsa | 200 ka motsotsoana |
| Boemo | 142mm*58mm*15mm(Bolelele ka ho Fetisisa) 125mm*58mm*15mm (E khutšoanyane ka ho fetisisa) |
| mohlala | KST-610 |
| Litšobotsi | Leka ts'ebetso, latela ts'ebeliso |
| Khatello ea mosebetsi | Ho fihlela ho 180kg / cm2 |
| kopo | Oli ea mokelikeli, sekhomaretsi se seng thata |
| Tlhokahalo ea khatello ea moea | 0.4-0.6MPa |
| boholo ba mmele | 30mm * 30mm * 175mm |
